High Pressure Compressed Air Dryers for Laser Cutting - Shenzhen Biteman Technology Co., Ltd.

Laser Cutting Special Dryer

Working Pressure: 1.3Mpa ≤P<1.5Mpa;

Model 038 of Inlet temperature: T≤35℃;

Model 085 of Inlet temperature: T≤45℃.

Selection Standard: Working pressure: 0.4Mpa≤P<2.0Mpa, Inlet temperature: 2℃≤T≤45℃.

Technical Parameter: Pressure dew point-20℃~-40℃, Purge air≤5%, Pressure drop≤0.02Mpa, Noise Level ≤75dB.

+86 189-2349-1595

Standard Working Condition: Working Pressure: 1.3Mpa ≤P<1.5Mpa; Model 038 of Inlet temperature: T≤35℃; Model 085 of Inlet temperature: T≤45℃.
Selection Standard: Working pressure: 0.4Mpa≤P<2.0Mpa, Inlet temperature: 2℃≤T≤45℃.
Technical Parameter: Pressure dew point-20℃~-40℃, Purge air≤5%, Pressure drop≤0.02Mpa, Noise Level ≤75dB.
Standard Electrical Supply: 220 50Hz.
Standard Configuration: Biteman control system.
Special Configuration: Inlet temperature from 45℃<T≤60℃ can be customized; DCS remote control function is optional.